crystal oscillator co20_101021_nt5032sc_e temperature-compensated crystal oscillator with afc function (vc-tcxo) nt5032s series model name nt5032sc for mobile phones, etc. main application supports low power supply voltage. (supports dc +2.4 v0.1 v to +3.3 v5 %.) ultra-compact and light with a height, cubic volume, and weight of max. 1.5mm, 0.022 cm 3 , and 0.06 g, respectively. with an afc (automatic frequency control) function. low power consumption. a surface-mount crystal oscillator. (refow soldering is possible.) lead-free. meets the requirements for re-fow profling using lead-free solder . features item model nt5032sc nominal frequency range (mhz) 12.6 to 26 supply voltage [v cc ] (v) +3.0 load impedance 10 k//10 pf current consumption (ma) max. 1.5 output voltage min. 0.8 v(p-p) (dc coupling *1) frequency/temperature characteristics max. 2.510 C6 operating temperature range (c) C30 to +75 storage temperature range (c) C40 to +85 frequency/voltage coeffcient max. 0.310 C6 /+3.0 v5 % frequency/load coeffcient max. 0.210 C6 /(10 k//10 pf) 10 % long-term frequency stability max. 1.010 C6 /year frequency control range 9.010 C6 to 15.010 C6 /+1.5 v1 v *2 ? frequency setting conditions 1. frequencies are set at normal temperatures (+252 c). 2. frequencies are set with a printed board that has a ground pattern attached to the underside of an oscillator. ? if you require a product with a different frequency, power supply voltage, frequency control range, etc. to the standard specifcations, please contact us with your enquiries. ? products without the afc (automatic frequency control) function are available. if you require such a product, please contact us. *1. a dc-cut capacitor is not embedded in this crystal oscillator. connect a dc-cut capacitor (1,000 pf) to the line-out terminal of the oscillator. *2.this is a representative specifcation. the specifcations may change according to the frequency that you request. specifcations 4.0 0.5 0.5 1.2 1.2 0.7 0.7 5.0 0.2 1.4 +0.1 -0.2 3.2 0.2 3.2 0.2 #2 #3 1.27 0.2 1.0 0.1 0.8 0.1 c0.3 1.6 0.2 1.27 0.2 #1 #4 #2 #3 #1 #4 0.7 0.1 land pattern (typical ) mm #1 #2 #3 #4 v cont gnd output v cc terminal land connections dimensions frequency (mhz) ordering code 12.6 nt5032sc-12.6m-nsa3341c 12.8 nt5032sc-12.8m-nsa3341a 13 nt5032sc-13m-nsa3341a 14.4 nt5032sc-14.4m-nsa3341a 14.7456 nt5032sc-14.7456m-nsa3341a 15.36 nt5032sc-15.36m-nsa3341c 16 nt5032sc-16m-nsa3341a 16.384 nt5032sc-16.384m-nsa3341c 19.2 nt5032sc-19.2m-nsa3341a 19.44 nt5032sc-19.44m-nsa3341a 19.6608 nt5032sc-19.6608m-nsa3341c 19.68 nt5032sc-19.68m-nsa3341c 19.8 nt5032sc-19.8m-nsa3341c 20 NT5032SC-20M-NSA3341A 20.48 nt5032sc-20.48m-nsa3341c 21.25 nt5032sc-21.25m-nsa3341a 24.576 nt5032sc-24.576m-nsa3341c 25 nt5032sc-25m-nsa3341c 26 nt5032sc-26m-nsa3341c the above frequencies are ndks standard frequencies. frequencies other than the above are available. feel free to contact our sales representatives. list of ordering codes
|